saji/OmniLinkBridge
1
0
Fork 0
mirror of https://github.com/excaliburpartners/OmniLinkBridge synced 2024-12-22 18:52:24 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
OmniLinkBridge/README.md

339 lines
10 KiB
Markdown
Raw Blame History

# OmniLink Bridge
Provides MQTT bridge, web service API, time sync, and logging for [HAI/Leviton OmniPro II controllers](https://www.leviton.com/en/products/brands/omni-security-automation). Provides integration with [Samsung SmartThings via web service API](https://github.com/excaliburpartners/SmartThings-OmniPro) and [Home Assistant via MQTT](https://www.home-assistant.io/components/mqtt/).
## Download
You can use docker to build an image from git or download the [binary here](https://github.com/excaliburpartners/OmniLinkBridge/releases/latest/download/OmniLinkBridge.zip).
## Requirements
- [Docker](https://www.docker.com/)
- .NET Framework 4.5.2 (or Mono equivalent)
## Operation
OmniLink Bridge is divided into the following modules and configurable settings. Configuration settings can also be set as environment variables by using their name in uppercase. Refer to [OmniLinkBridge.ini](https://github.com/excaliburpartners/OmniLinkBridge/blob/master/OmniLinkBridge/OmniLinkBridge.ini) for specifics.
- OmniLinkII: controller_
- Maintains connection to the OmniLink controller
- Thermostats
- If no status update has been received after 4 minutes a request is issued
- A status update containing a temperature of 0 is ignored
- This can occur when a ZigBee thermostat has lost communication
- Time Sync: time_
- Controller time is checked and compared to the local computer time disregarding time zones
- MQTT: mqtt_
- Maintains connection to the MQTT broker
- Publishes discovery topics for [Home Assistant](https://www.home-assistant.io/components/mqtt/) to auto configure devices
- Publishes topics for status received from the OmniLinkII module
- Subscribes to command topics and sends commands to the OmniLinkII module
- Web API: webapi_
- Provides integration with [Samsung SmartThings](https://github.com/excaliburpartners/SmartThings-OmniPro)
- Allows an application to subscribe to receive POST notifications status updates are received from the OmniLinkII module
- On failure to POST to callback URL subscription is removed
- Recommended for application to send subscribe reqeusts every few minutes
- Requests to GET endpoints return status from the OmniLinkII module
- Requests to POST endpoints send commands to the OmniLinkII module
- Logger
- Console output: verbose_
- Enabled by default
- Thermostats (verbose_thermostat_timer)
- After 5 minutes of no status updates a warning will be logged
- When a current temperature of 0 is received a warning will be logged
- MySQL logging: mysql_
- Thermostats are logged every minute and when an event is received
- Push notifications: notify_
- Always sent for area alarms and critical system events
- Optionally enable for area status changes and console messages
- Email: mail_
- Prowl: prowl_
- Pushover: pushover_
## Docker Hub Quickstart
Quickly get started with console logging by specifying the controller address and encryption keys.
```
docker run --name="omnilink-bridge" \
-v /etc/localtime:/etc/localtime:ro \
-e CONTROLLER_ADDRESS='' \
-e CONTROLLER_KEY1='00-00-00-00-00-00-00-00' \
-e CONTROLLER_KEY2='00-00-00-00-00-00-00-00' \
--net=host excaliburpartners/omnilink-bridge
```
Or start in the background with time sync and MQTT modules enabled.
```
docker run -d --name="omnilink-bridge" --restart always \
-v /etc/localtime:/etc/localtime:ro \
-e CONTROLLER_ADDRESS='' \
-e CONTROLLER_KEY1='00-00-00-00-00-00-00-00' \
-e CONTROLLER_KEY2='00-00-00-00-00-00-00-00' \
-e TIME_SYNC='yes' \
-e MQTT_ENABLED='yes' \
-e MQTT_SERVER='' \
-e MQTT_USERNAME='' \
-e MQTT_PASSWORD='' \
--net=host excaliburpartners/omnilink-bridge
```
## Docker Hub with Configuration File
1. Configure at a minimum the controller IP and encryptions keys.
```
mkdir /opt/omnilink-bridge
curl https://raw.githubusercontent.com/excaliburpartners/OmniLinkBridge/master/OmniLinkBridge/OmniLinkBridge.ini -o /opt/omnilink-bridge/OmniLinkBridge.ini
vim /opt/omnilink-bridge/OmniLinkBridge.ini
```
2. Start docker container
```
docker run -d --name="omnilink-bridge" -v /opt/omnilink-bridge:/config -v /etc/localtime:/etc/localtime:ro --net=host --restart always excaliburpartners/omnilink-bridge
```
3. Verify connectivity by looking at logs
```
docker logs omnilink-bridge
```
## Docker for Developers
1. Clone git repo and build docker image
```
git clone https://github.com/excaliburpartners/OmniLinkBridge.git
cd OmniLinkBridge
docker build --tag="omnilink-bridge" .
```
2. Configure at a minimum the controller IP and encryptions keys. The web service port must be 8000 unless the Dockerfile is changed.
```
mkdir /opt/omnilink-bridge
cp OmniLinkBridge/OmniLinkBridge.ini /opt/omnilink-bridge
vim /opt/omnilink-bridge/OmniLinkBridge.ini
```
3. Start docker container
```
docker run -d --name="omnilink-bridge" -v /opt/omnilink-bridge:/config -v /etc/localtime:/etc/localtime:ro --net=host --restart always omnilink-bridge
```
4. Verify connectivity by looking at logs
```
docker logs omnilink-bridge
```
## Installation Windows
1. Copy files to your desired location like C:\OmniLinkBridge
2. Edit OmniLinkBridge.ini and define at a minimum the controller IP and encryptions keys
3. Run OmniLinkBridge.exe from the command prompt to verify connectivity
4. Add Windows service
```
sc create OmniLinkBridge binpath=C:\OmniLinkBridge\OmniLinkBridge.exe
```
5. Start service
```
net start OmniLinkBridge
```
## Installation Linux
1. Copy files to your desired location like /opt/OmniLinkBridge
2. Configure at a minimum the controller IP and encryptions keys
```
vim OmniLinkBridge.ini
```
3. Run as interactive to verify connectivity
```
mono OmniLinkBridge.exe -i
```
4. Add systemd file and configure paths
```
cp omnilinkbridge.service /etc/systemd/system/
vim /etc/systemd/system/omnilinkbridge.service
systemctl daemon-reload
```
5. Enable at boot and start service
```
systemctl enable omnilinkbridge.service
systemctl start omnilinkbridge.service
```
## MQTT
### Areas
```
SUB omnilink/areaX/name
string Area name
SUB omnilink/areaX/state
string triggered, pending, armed_night, armed_night_delay, armed_home, armed_home_instant, armed_away, armed_vacation, disarmed
SUB omnilink/areaX/basic_state
string triggered, pending, armed_night, armed_home, armed_away, disarmed
PUB omnilink/areaX/command
string arm_home, arm_away, arm_night, disarm, arm_home_instant, arm_night_delay, arm_vacation
```
### Zones
```
SUB omnilink/zoneX/name
string Zone name
SUB omnilink/zoneX/state
string secure, not_ready, trouble, armed, tripped, bypassed
SUB omnilink/zoneX/basic_state
string OFF, ON
SUB omnilink/zoneX/current_temperature (optional)
int Current temperature in degrees fahrenheit
SUB omnilink/zoneX/current_humidity (optional)
int Current relative humidity
PUB omnilink/zoneX/command
string bypass, restore
```
### Units
```
SUB omnilink/unitX/name
string Unit name
SUB omnilink/unitX/state
PUB omnilink/unitX/command
string OFF, ON
SUB omnilink/unitX/brightness_state
PUB omnilink/unitX/brightness_command
int Level from 0 to 100 percent
SUB omnilink/unitX/scene_state
PUB omnilink/unitX/scene_command
string A-L
```
### Thermostats
```
SUB omnilink/thermostatX/name
string Thermostat name
SUB omnilink/thermostatX/current_operation
string idle, cool, heat
SUB omnilink/thermostatX/current_temperature
int Current temperature in degrees fahrenheit
SUB omnilink/thermostatX/current_humidity
int Current relative humidity
SUB omnilink/thermostatX/temperature_heat_state
SUB omnilink/thermostatX/temperature_cool_state
PUB omnilink/thermostatX/temperature_heat_command
PUB omnilink/thermostatX/temperature_cool_command
int Setpoint in degrees fahrenheit
SUB omnilink/thermostatX/humidify_state
SUB omnilink/thermostatX/dehumidify_state
PUB omnilink/thermostatX/humidify_command
PUB omnilink/thermostatX/dehumidify_command
int Setpoint in relative humidity
SUB omnilink/thermostatX/mode_state
PUB omnilink/thermostatX/mode_command
string auto, off, cool, heat
SUB omnilink/thermostatX/fan_mode_state
PUB omnilink/thermostatX/fan_mode_command
string auto, on, cycle
SUB omnilink/thermostatX/hold_state
PUB omnilink/thermostatX/hold_command
string off, hold
```
### Buttons
```
SUB omnilink/buttonX/name
string Button name
SUB omnilink/buttonX/state
string OFF, ON
PUB omnilink/buttonX/command
string ON
```
### Messages
```
SUB omnilink/messageX/name
string Message name
SUB omnilink/messageX/state
string off, displayed, displayed_not_acknowledged
PUB omnilink/messageX/command
string show, show_no_beep, show_no_beep_or_led, clear
```
## Web API
To test the web service API you can use your browser to view a page or PowerShell (see below) to change a value.
```
Invoke-WebRequest -Uri "http://localhost:8000/SetUnit" -Method POST -ContentType "application/json" -Body (convertto-json -InputObject @{"id"=1;"value"=100}) -UseBasicParsing
```
### Subscription
```
POST /Subscribe
{ "callback": url }
Callback is a POST request with Type header added and json body identical to the related /Get
Type: area, contact, motion, water, smoke, co, temp, unit, thermostat
```
### Areas
```
GET /ListAreas
GET /GetArea?id=X
```
### Zones
```
GET /ListZonesContact
GET /ListZonesMotion
GET /ListZonesWater
GET /ListZonesSmoke
GET /ListZonesCO
GET /ListZonesTemp
GET /GetZone?id=X
```
### Units
```
GET /ListUnits
GET /GetZone?id=X
POST /SetUnit
POST /SetUnitKeypadPress
{ "id":X, "value":0-100 }
```
### Thermostats
```
GET /ListThermostats
GET /GetThermostat?id=X
POST /SetThermostatCoolSetpoint
POST /SetThermostatHeatSetpoint
POST /SetThermostatMode
POST /SetThermostatFanMode
POST /SetThermostatHold
{ "id":X, "value": }
int mode 0=off, 1=heat, 2=cool, 3=auto, 4=emergency heat
int fanmode 0=auto, 1=on, 2=circulate
int hold 0=off, 1=on
```
### Thermostats
```
GET /ListButtons
POST /PushButton
{ "id":X, "value":1 }
```
## MySQL
The [MySQL ODBC Connector](http://dev.mysql.com/downloads/connector/odbc/) is required for MySQL logging. The docker image comes with the MySQL ODBC connector installed. For Windows and Linux you will need to download and install it.
Configure mysql_connection in OmniLinkBridge.ini. For Windows change DRIVER={MySQL} to name of the driver shown in the ODBC Data Source Administrator.
```
mysql_connection = DRIVER={MySQL};SERVER=localhost;DATABASE=OmniLinkBridge;USER=root;PASSWORD=myPassword;OPTION=3;
```
## Telemetry
OmniLink Bridge collects anonymous telemetry data to help improve the software. You can opt of telemetry by setting a TELEMETRY_OPTOUT environment variable to 1.
Reference in a new issue View git blame Copy permalink