src/groovylight/common.py

@@ -1,4 +1,4 @@
-from amaranth import unsigned, Cat
+from amaranth import Array, unsigned
 from amaranth.lib import wiring, data
 from amaranth.lib.wiring import Out
 
@@ -13,9 +13,6 @@ class RGBLayout(data.StructLayout):
             }
         )
 
-    def __call__(self, value):
-        return RGBView(self, value)
-
 
 Rgb888Layout = RGBLayout(8, 8, 8)
 Rgb666Layout = RGBLayout(6, 6, 6)
@@ -23,23 +20,6 @@ Rgb666Layout = RGBLayout(6, 6, 6)
 Rgb111Layout = RGBLayout(1, 1, 1)
 
 
-class RGBView(data.View):
-
-    def channel_size(self) -> int:
-        return self.red.shape()
-    def channel_slice(self, bit: int) -> Rgb111Layout:
-        """Select bits from each channel and use it to form an Rgb111Layout.
-        This is useful for BCM stuff, since the bits are sliced to form a bitplane.
-        """
-        return Rgb111Layout(
-            Cat(
-                self.red.bit_select(bit, 1),
-                self.green.bit_select(bit, 1),
-                self.blue.bit_select(bit, 1),
-            )
-        )
-
-
 class Hub75Stream(wiring.Signature):
     """A Hub75E Driver for a single string of panels."""
 

src/groovylight/hub75.py

@@ -1,4 +1,4 @@
-from amaranth import Module, Cat, Mux, Print, ShapeLike, Signal, Assert, Array
+from amaranth import Module, Cat, Mux, ShapeLike, Signal, Assert, Array
 from amaranth.build import Platform
 from amaranth.lib import wiring, data
 from amaranth.lib.wiring import In, Out
@@ -80,63 +80,6 @@ class SwapBuffer(wiring.Component):
         return m
 
 
-class DisplayClock(wiring.Component):
-    """Generates the display clock automatically with the correct delay
-    when start is asserted. Stops when `done` is strobed.
-
-    Can either be used as a /2 clock divider or a /4 with the `double_fetch` parameter.
-    The startup delay is chosen based on the mode or can be set with `startup_delay`
-    """
-
-    def __init__(self, *, double_fetch: bool = True, startup_delay=None, src_loc_at=0):
-        self.double_fetch = double_fetch
-        if startup_delay is None:
-            self.startup_delay = 4 if double_fetch else 1  # FIXME: choose right values.
-        else:
-            self.startup_delay = startup_delay
-
-        super().__init__(
-            {
-                "start": In(1),
-                "done": In(1),
-                "clk": Out(1),
-            },
-            src_loc_at=src_loc_at,
-        )
-
-    def elaborate(self, platform: Platform) -> Module:
-        m = Module()
-
-        counter = Signal(range(max(self.startup_delay, 2) + 1))
-
-        with m.FSM():
-            with m.State("init"):
-                m.d.sync += [counter.eq(0), self.clk.eq(0)]
-                with m.If(self.start == 1):
-                    m.next = "warmup"
-            with m.State("warmup"):
-                m.d.sync += counter.eq(counter + 1)
-                with m.If(counter == self.startup_delay - 1):
-                    m.next = "run"
-                    m.d.sync += counter.eq(0)
-
-            with m.State("run"):
-                with m.If(self.done == 1):
-                    m.next = "init"
-                if self.double_fetch:
-                    m.d.sync += [
-                        self.clk.eq(~counter[1]),
-                        counter.eq(counter + 1),
-                    ]
-                else:
-                    m.d.sync += [
-                        self.clk.eq(~counter),
-                        counter.eq(~counter),
-                    ]
-
-        return m
-
-
 class Hub75DataDriver(wiring.Component):
     def __init__(
         self,
@@ -174,28 +117,40 @@ class Hub75DataDriver(wiring.Component):
         m = Module()
 
         counter = Signal(32)
-        m.d.sync += counter.eq(counter + 1)
 
         pixnum = Signal(range(self.panel_length), init=self.panel_length - 1)
         if self.double_fetch:
             pixrow = Signal(1)
             m.d.comb += self.bram.addr.eq(Cat(pixrow, pixnum))
-            ram_rgb_slice = self.bram.data.channel_slice(self.bcm_select)
+            ram_rgb_slice = Cat(
+                self.bram.data["red"].bit_select(self.bcm_select, 1),
+                self.bram.data["blue"].bit_select(self.bcm_select, 1),
+                self.bram.data["green"].bit_select(self.bcm_select, 1),
+            )
         else:
-            m.d.comb += self.bram.addr.eq(pixnum)
             ram_rgb_slice = Array(
                 [
-                    self.bram.data[0].channel_slice(self.bcm_select),
+                    Cat(
-                    self.bram.data[1].channel_slice(self.bcm_select),
+                        self.bram.data[0]["red"].bit_select(self.bcm_select, 1),
+                        self.bram.data[0]["blue"].bit_select(self.bcm_select, 1),
+                        self.bram.data[0]["green"].bit_select(self.bcm_select, 1),
+                    ),
+                    Cat(
+                        self.bram.data[1]["red"].bit_select(self.bcm_select, 1),
+                        self.bram.data[1]["blue"].bit_select(self.bcm_select, 1),
+                        self.bram.data[1]["green"].bit_select(self.bcm_select, 1),
+                    ),
                 ]
             )
 
+            m.d.comb += self.bram.addr.eq(pixnum)
+
         with m.FSM():
             with m.State("init"):
                 m.d.sync += [
                     self.done.eq(0),
                     counter.eq(0),
-                    pixnum.eq(pixnum.init),
+                    pixnum.eq(pixnum.reset),
                 ]
                 if self.double_fetch:
                     m.d.sync += pixrow.eq(0)
@@ -203,31 +158,30 @@ class Hub75DataDriver(wiring.Component):
                     m.d.sync += self.bram.en.eq(1)
                     m.next = "prefetch" if self.double_fetch else "writerow"
             with m.State("prefetch"):
-                # Allow the BRAM to settle after being enabled.
+                # TODO: do we need this
-                m.d.sync += counter.eq(0)
                 m.next = "writerow"
 
             with m.State("writerow"):
                 if self.double_fetch:
-                    c = counter[0:2]
+                    c = counter[0:1]
-                    with m.If(c == 0b0):
+                    with m.If(c == 0):
                         m.d.sync += [
                             self.data.rgb0.eq(ram_rgb_slice),
                             pixrow.eq(1),
                         ]
-                    with m.If(c == 0b01):
+                    with m.If(c == 1):
-                        pass
-                    with m.If(c == 0b10):
                         m.d.sync += self.data.rgb1.eq(ram_rgb_slice)
+                    with m.If(c == 2):
+                        pass
+
+                    with m.If(c == 3):
                         m.d.sync += [
+                            counter.eq(0),
                             pixnum.eq(pixnum - 1),
                             pixrow.eq(0),
                         ]
                         with m.If(pixnum == 0):
                             m.next = "done"
-
-                    with m.If(c == 0b11):
-                        m.d.sync += counter.eq(0)
                 else:
                     with m.If(counter[0] == 0):
                         m.d.sync += [
@@ -248,6 +202,82 @@ class Hub75DataDriver(wiring.Component):
         return m
 
 
+class Hub75StringDriver(wiring.Component):
+    """A data driver for Hub75 panels. This accesses the line memory and feeds out the data.
+    It is controlled by a Hub75Coordinator to signal when it should run and what bit of the data
+    it should send.
+    """
+
+    def __init__(self, panel_length: int = 128, *, src_loc_at=0):
+        self.panel_length = panel_length
+        super().__init__(
+            {
+                "bcm_select": In(3),
+                "done": Out(1),
+                "start": In(1),
+                "bram_port": In(
+                    ReadPort.Signature(
+                        addr_width=ceil_log2(panel_length),
+                        shape=data.ArrayLayout(Rgb666Layout, 2),
+                    )
+                ),
+                "display_out": Out(Hub75Data()),
+            },
+            src_loc_at=src_loc_at,
+        )
+
+    def elaborate(self, platform: Platform) -> Module:
+        m = Module()
+
+        self._counter = counter = Signal(32)  # unused count is optimized out
+        m.d.sync += counter.eq(counter + 1)
+
+        ram_rgb0_slice = Cat(
+            self.bram_port.data[0]["red"].bit_select(self.bcm_select, 1),
+            self.bram_port.data[0]["blue"].bit_select(self.bcm_select, 1),
+            self.bram_port.data[0]["green"].bit_select(self.bcm_select, 1),
+        )
+        ram_rgb1_slice = Cat(
+            self.bram_port.data[1]["red"].bit_select(self.bcm_select, 1),
+            self.bram_port.data[1]["blue"].bit_select(self.bcm_select, 1),
+            self.bram_port.data[1]["green"].bit_select(self.bcm_select, 1),
+        )
+        m.d.comb += [
+            self.display_out.rgb0.eq(ram_rgb0_slice),
+            self.display_out.rgb1.eq(ram_rgb1_slice),
+        ]
+        m.d.sync += Assert(self.bcm_select < 6)
+
+        pixnum = Signal(range(self.panel_length), init=self.panel_length - 1)
+        m.d.comb += self.bram_port.addr.eq(pixnum)
+
+        with m.FSM():
+            with m.State("init"):
+                m.d.sync += [
+                    self.done.eq(0),
+                    counter.eq(0),
+                    pixnum.eq(self.panel_length - 1),
+                ]
+                with m.If(self.start == 1):
+                    m.d.sync += self.bram_port.en.eq(1)
+                    m.next = "writerow"
+            with m.State("writerow"):
+                with m.If(counter[0] == 0):
+                    # do nothing
+                    pass
+
+                with m.If((counter[0] == 1) & (pixnum != 0)):
+                    m.d.sync += pixnum.eq(pixnum - 1)
+
+                with m.Else():
+                    m.next = "done"
+            with m.State("done"):
+                m.d.sync += [self.done.eq(1), self.bram_port.en.eq(0)]
+                m.next = "init"
+
+        return m
+
+
 class Hub75Coordinator(wiring.Component):
     """A shared-control hub75 driver"""
 
@@ -276,9 +306,7 @@ class Hub75Coordinator(wiring.Component):
         for i in range(self.n_strings):
             sb = SwapBuffer(depth=128, shape=data.ArrayLayout(Rgb666Layout, 2))
             bufs.append(sb)
-            stringdriver = Hub75DataDriver(
+            stringdriver = Hub75StringDriver(128)
-                128, data_shape=Rgb666Layout, double_fetch=False
-            )
             strings.append(stringdriver)
             wiring.connect(m, sb.read_port, stringdriver.bram_port)
             m.d.comb += [

src/groovylight/tests/__init__.py

@@ -1,7 +0,0 @@
-
-import pytest
-
-
-@pytest.fixture()
-def simfixture(request: pytest.FixtureRequest, tmp_path): 
-    pass

src/groovylight/tests/test_common.py

@@ -1,23 +0,0 @@
-from amaranth import unsigned
-import pytest
-
-from groovylight.common import Rgb888Layout, Rgb666Layout, RGBView
-
-
-def test_rgbview():
-    rgb = Rgb888Layout(0xAABBCC)
-
-    assert rgb.channel_size() == unsigned(8)
-
-    rgb18 = Rgb666Layout(0x2DEFD)
-
-    slice = rgb.channel_slice(1)
-    assert isinstance(slice, RGBView), "channel_slice should return another rgbview"
-
-    assert slice.channel_size() == unsigned(1), "channel_slice channel size should be 1"
-    assert isinstance(
-        rgb18.channel_slice(5), RGBView
-    ), "channel_slice should return another rgbview"
-
-    with pytest.raises(ValueError, match="Target of a view is 0 bit"):
-        rgb.channel_slice(8)

src/groovylight/tests/test_hub75.py

@@ -4,40 +4,37 @@ from amaranth.lib.memory import Memory
 from amaranth.sim import Simulator
 import pytest
 
-from groovylight.common import Rgb888Layout, Rgb666Layout
+from groovylight.common import Rgb888Layout
 
-from groovylight.hub75 import (
+from ..hub75 import Hub75Coordinator, Hub75DataDriver, Hub75StringDriver, Rgb666Layout
-    DisplayClock,
-    Hub75Coordinator,
-    Hub75DataDriver,
-    SwapBuffer,
-)
 
 
-def test_swapbuffer():
+def test_stringdriver():
-    dut = SwapBuffer(Rgb666Layout, 512)
+    # the string driver test must
-    sim = Simulator(dut)
+    # 1. finish
-    sim.add_clock(1e-6)
+    # 2. strobe through all of the data in the array
+    # 3. slice the correct bit from the data.
+    m = Module()
+    m.submodules.dut = dut = Hub75StringDriver()
+    m.submodules.mem = mem = Memory(
+        shape=data.ArrayLayout(Rgb666Layout, 2), depth=128, init=[]
+    )
+    port = mem.read_port()
+
+    wiring.connect(m, port, dut.bram_port)
 
     async def testbench(ctx):
-        init_color = {"red": 0, "green": 0, "blue": 0}
+        # select a bit, strobe start, read values, test against known.
-        test_color = {"red": 8, "green": 8, "blue": 8}
+        ctx.set(dut.bcm_select, 5)
-        ctx.set(dut.selector, 0)
+        ctx.set(dut.start, 1)
-        ctx.set(dut.write_port.addr, 1)
-        ctx.set(dut.read_port.addr, 1)
-        ctx.set(dut.write_port.data, test_color)
         await ctx.tick()
-        # assert that the read port addr 1 = 0
+        ctx.set(dut.start, 0)
-        assert ctx.get(dut.read_port.data) == init_color
+        assert ctx.get(dut.bram_port.en) == 1
-        # swap buffer
+        pass
-        ctx.set(dut.selector, 1)
+
-        await ctx.tick().repeat(
+    sim = Simulator(m)
-            2
+    sim.add_clock(1e-6)
-        )  # takes two clocks after switching selector to output data.
-        assert ctx.get(dut.read_port.data) == test_color
 
-    # TODO: add more assertions/verification
-    sim.add_testbench(testbench)
     with sim.write_vcd("output.vcd"):
         sim.run_until(1e-6 * 1000)
 
@@ -47,57 +44,31 @@ def test_datadriver():
     # 1. finish
     # 2. strobe through all of the data in the array
     # 3. slice the correct bit from the data.
-    memdata = [{"red": x, "green": x, "blue": x} for x in range(256)]
     m = Module()
     m.submodules.dut = dut = Hub75DataDriver()
-    m.submodules.mem = mem = Memory(shape=Rgb888Layout, depth=256, init=memdata)
+    m.submodules.mem = mem = Memory(shape=Rgb888Layout, depth=256, init=[])
-    m.submodules.clocker = clocker = DisplayClock()
-    m.d.comb += [
-        clocker.start.eq(dut.start),
-        clocker.done.eq(dut.done),
-    ]
-
     port = mem.read_port()
 
     wiring.connect(m, port, dut.bram)
 
     async def testbench(ctx):
         # select a bit, strobe start, read values, test against known.
-        ctx.set(dut.bcm_select, 7)
+        ctx.set(dut.bcm_select, 5)
         ctx.set(dut.start, 1)
         await ctx.tick()
         ctx.set(dut.start, 0)
-        assert ctx.get(dut.bram.en) == 1
+        assert ctx.get(dut.bram_port.en) == 1
-        await ctx.tick().until(dut.done == 1)
+        pass
-
-    async def rgbtest(ctx):
-        await ctx.tick().until(dut.start == 1)
-        counter = 127
-        bitslice = 7
-        async for _, rgb0, rgb1 in ctx.posedge(clocker.clk).sample(dut.data.rgb0, dut.data.rgb1):
-            assert counter >= 0, "should not do more than 128 clocks"
-            e0 = ctx.get(mem.data[counter << 1])
-            e1 = ctx.get(mem.data[(counter << 1) + 1])
-            print(counter)
-            for r, e in [(rgb0, e0), (rgb1, e1)]:
-                assert r.red == (e.red >> bitslice) & 1
-                assert r.green == (e.green >> bitslice) & 1
-                assert r.blue == (e.blue >> bitslice) & 1
-            counter = counter - 1
-
 
     sim = Simulator(m)
     sim.add_clock(1e-6)
-    sim.add_testbench(testbench)
-    sim.add_testbench(rgbtest, background=True)
 
     with sim.write_vcd("output.vcd"):
-        sim.run()
+        sim.run_until(1e-6 * 1000)
-        # sim.run_until(1e-6 * 4000)
 
 
 @pytest.mark.skip()
-def test_hub75_coordinator():
+def test_hub75():
     m = Module()
     m.submodules.dut = dut = Hub75Coordinator(1)
 

src/groovylight/tests/test_swapbuffer.py

@@ -0,0 +1,31 @@
+from amaranth.sim import Simulator
+
+from ..hub75 import Hub75StringDriver, Rgb666Layout, SwapBuffer
+
+
+def test_swapbuffer():
+    dut = SwapBuffer(Rgb666Layout, 512)
+    sim = Simulator(dut)
+    sim.add_clock(1e-6)
+
+    async def testbench(ctx):
+        init_color = {"red": 0, "green": 0, "blue": 0}
+        test_color = {"red": 8, "green": 8, "blue": 8}
+        ctx.set(dut.selector, 0)
+        ctx.set(dut.write_port.addr, 1)
+        ctx.set(dut.read_port.addr, 1)
+        ctx.set(dut.write_port.data, test_color)
+        await ctx.tick()
+        # assert that the read port addr 1 = 0
+        assert ctx.get(dut.read_port.data) == init_color
+        # swap buffer
+        ctx.set(dut.selector, 1)
+        await ctx.tick().repeat(
+            2
+        )  # takes two clocks after switching selector to output data.
+        assert ctx.get(dut.read_port.data) == test_color
+
+    # TODO: add more assertions/verification
+    sim.add_testbench(testbench)
+    with sim.write_vcd("output.vcd"):
+        sim.run_until(1e-6 * 1000)