example-config.toml

@@ -1,52 +0,0 @@
-# Groovylight configuration base file.
-# make your edits using this, at the moment the defaults are not stored
-# in the program so every value must be specified.
-
-
-[hardware]
-# The target platform.
-# Valid options: "cxxrtl", "colorlight"
-type = "cxxrtl" 
-
-# hardware-specific options, these are gently parsed i.e extra options are ignored.
-# colorlight options
-
-# Maps the strings array onto the colorlight connectors.
-# it's fine (but will raise a warning) if the list is longer than the number of strings.
-stringmapping = [ "J1", "J2", "J3", "J4", "J5", "J6", "J7", "J8" ]
-
-# cxxrtl options
-
-
-[network]
-# Network port to listen on for UDP datagrams.
-port = 9999
-
-# IPv4 address to use for the Ethernet port.
-# This setting is ignored for CXXRTL.
-# 'dhcp' will get the IP at runtime.
-ip = "dhcp" # Can also be e.g. "192.168.0.123"
-
-[display]
-strict = true # allows some wacky configurations, like panels that overlap.
-
-[[display.strings]]
-position = { x = 31, y = 0 }
-dimensions = { width = 256, height = 64 }
-rotation = "UPDOWN"
-[[display.strings]]
-position = { x = 32, y = 0 }
-dimensions = { width = 256, height = 64 }
-rotation = "LEFTRIGHT"
-[[display.strings]]
-position = { x = 32, y = 64 }
-dimensions = { width = 256, height = 64 }
-rotation = "LEFTRIGHT"
-[[display.strings]]
-position = { x = 32, y = 128 }
-dimensions = { width = 256, height = 64 }
-rotation = "LEFTRIGHT"
-[[display.strings]]
-position = { x = 32, y = 192 }
-dimensions = { width = 256, height = 64 }
-rotation = "LEFTRIGHT"

src/groovylight/bitslicer.py

@@ -8,6 +8,7 @@ from amaranth.utils import ceil_log2
 from .common import Rgb666Layout, Hub75Stream, Hub75Ctrl, Hub75Data
 
 
+
 class SwapBuffer(wiring.Component):
     """A pair of BRAMs for holdling line data that are swapped between using an external signal.
 
@@ -163,7 +164,8 @@ class Hub75Coordinator(wiring.Component):
         self.n_strings = n_strings
         super().__init__(
             {
-                "hub75": Out(Hub75Ctrl(n_strings)),
+                "ctrl": Out(Hub75Ctrl),
+                "data": data.ArrayLayout(Hub75Data, n_strings),
                 # TODO: fetching routine? maybe it's passed through.
             }
         )

src/groovylight/common.py

@@ -1,4 +1,4 @@
-from amaranth import Array, unsigned
+from amaranth import unsigned
 from amaranth.lib import wiring, data
 from amaranth.lib.wiring import Out
 
@@ -42,14 +42,13 @@ class Hub75Ctrl(wiring.Signature):
 
     """
 
-    def __init__(self, n_strings: int = 1):
+    def __init__(self):
         super().__init__(
             {
                 "latch": Out(1),
                 "oe": Out(1),
                 "addr": Out(5),
                 "display_clk": Out(1),
-                "data": Out(Hub75Data()).array(n_strings),
             }
         )
 

src/groovylight/config.py

@@ -1,25 +0,0 @@
-import tomllib
-from pathlib import Path
-
-from groovylight.geom import (
-    Coord,
-    DisplayDimensions,
-    DisplayGeometry,
-    DisplayRotation,
-    DisplayString,
-)
-
-
-class Config:
-    def __init__(self, file: Path) -> None:
-        with file.open("rb") as f:
-            self.conf = tomllib.load(f)
-
-        self.geom = DisplayGeometry(self.conf.display.strict)
-        for string in self.conf.display.strings:
-            pos = Coord(**string.position)
-            dims = DisplayDimensions(**string.dimensions)
-            rot = DisplayRotation[string.rotation]
-            disp = DisplayString(pos, dims, rot)
-            self.geom.add_string(disp)
-        self.network = self.conf.network  # FIXME: parse this properly.

src/groovylight/gamma.py

@@ -24,30 +24,8 @@
 # This file contains code to generate these timing adjustments and
 # control/quantify them.
 
-
-# FIXME: This doesn't work. As much as I wish it did. Because the numbers are still
-# added linearly. values that are between the powers of two (which are fitted to the log
-# curve) are not even remotely close to matching.
-# thankfully a gamma LUT is only 64 elements. we will need 3 muxes per color (1 per channel).
-
 from math import pow
 
-from amaranth import Module, Cat, Mux, ShapeLike, Signal, Assert
-from amaranth.build import Platform
-from amaranth.lib import wiring, data
-from amaranth.lib.wiring import In, Out
-from amaranth.lib.memory import Memory, ReadPort, WritePort
-from amaranth.utils import ceil_log2
-
-
-class GammaLUT(wiring.Component):
-    def __init__(self, n_bits: int, gamma: float = 2.2):
-        self.gamma = gamma
-        self.n_bits = n_bits
-        self.lut = [pow(x, gamma) for x in range(2**n_bits)]
-
-        # TODO: we can combo it maybe with the variable timing method.
-        super().__init__(wiring.Signature({}))
 
 def _gammavec(vals: [float], g: float) -> [float]:
     return [pow(x, g) for x in vals]

src/groovylight/geom.py

@@ -173,8 +173,7 @@ class DisplayGeometry:
         will overlap with an existing string.
         """
 
-        if self.strict:
-            for e in self._strings:
-                if e.intersects(s):
-                    raise RuntimeError(f"node {e} intersects with {s}")
-        self._strings.append(s)
+        for e in self._strings:
+            if e.intersects(s):
+                pass
+

src/groovylight/main.py

@@ -1,8 +1,10 @@
 # main entry point for CLI applications.
 
+
 import logging
 import argparse
 
+
 logger = logging.getLogger(__loader__.name)
 
 
@@ -10,7 +12,9 @@ def setup_logger(args):
     root_logger = logging.getLogger()
     handler = logging.StreamHandler()
 
-    formatter = logging.Formatter(style="{", fmt="{levelname:s}: {name:s}: {message:s}")
+    formatter = logging.Formatter(
+        style="{", fmt="{levelname:s}: {name:s}: {message:s}"
+    )
     handler.setFormatter(formatter)
 
     root_logger.addHandler(handler)
@@ -29,7 +33,6 @@ def main():
         const=logging.DEBUG,
         default=logging.INFO,
     )
-
     parser.add_argument(
         "-L",
         "--log-file",

src/groovylight/platforms/colorlight_5a75b_v8_2.py

@@ -23,9 +23,7 @@ class Colorlight_5A75B_R82Platform(LatticeECP5Platform):
             Subsignal("copi", Pins("T8", dir="o")),
             Attrs(IO_TYPE="LVCMOS33"),
         ),
-        *LEDResources(
-            pins="T6", invert=True, attrs=Attrs(IO_TYPE="LVCMOS33", DRIVE="4")
-        ),
+        *LEDResources(pins="T6", invert=True, attrs=Attrs(IO_TYPE="LVCMOS33", DRIVE="4")),
         *ButtonResources(
             pins="R7", invert=True, attrs=Attrs(IO_TYPE="LVCMOS33", PULLMODE="UP")
         ),

src/groovylight/platforms/cxxrtl_sim.py

@@ -1,9 +0,0 @@
-# CXXRTL-based simulator.
-# Uses SDL2 + black-box network stack to simulate the entire design.
-
-
-# Tasks:
-# Generate header with network port information
-# black box the UDP streaming.
-# provide code for display outputs to render onto SDL2 canvas.
-# compile code (optionally)

src/groovylight/sdram.py

@@ -13,80 +13,67 @@ from amaranth.lib.wiring import In, Out
 # word size = 32
 # 8 megabytes data.
 
-
 class SDRAMSignature(wiring.Signature):
-    """Signature of a variable-size sdram. Data is split between in/out and has out_en"""
-
+    """ Signature of a variable-size sdram. Data is split between in/out and has out_en"""
     def __init__(self, addr_width, data_width=32, bank_width=2):
-        super().__init__(
-            {
-                "nCS": Out(1),
-                "cke": Out(1),
-                "nRAS": Out(1),
-                "nCAS": Out(1),
-                "nWE": Out(1),
-                "addr": Out(addr_width),
-                "data_out": Out(data_width),
-                "data_in": In(data_width),
-                # todo: use dqm
-                "data_wren": Out(1),
-                "bank_cs": Out(bank_width),
-            }
-        )
-
+        super().__init__({
+            "nCS": Out(1),
+            "cke": Out(1),
+            "nRAS": Out(1),
+            "nCAS": Out(1),
+            "nWE": Out(1),
+            "addr": Out(addr_width),
+            "data_out": Out(data_width),
+            "data_in": In(data_width),
+            # todo: use dqm
+            "data_wren": Out(1),
+            "bank_cs": Out(bank_width),
+            })
 
 class _WriteBurstLength(enum.Enum, shape=1):
     """MRS Write burst mode"""
-
     BURST = 0
     SINGLE_BIT = 1
 
-
 class _TestMode(enum.Enum, shape=2):
-    """The "test mode" of the sdram. This is always zero pretty much"""
-
+    """ The "test mode" of the sdram. This is always zero pretty much"""
     MODE_REGISTER_SET = 0
     RESERVED0 = 1
     RESERVED1 = 2
     RESERVED2 = 3
 
-
 class _CASLatency(enum.Enum, shape=3):
-    """How many cycles of latency for the column address select to complete"""
-
+    """ How many cycles of latency for the column address select to complete """
     CYCL2 = 2
     CYCL3 = 3
 
-
 class _BurstType(enum.Enum, shape=1):
     SEQUENTIAL = 0
     INTERLEAVED = 1
 
-
 class _BurstLength(enum.IntEnum, shape=3):
-    """The size of the burst"""
-
+    """ The size of the burst """
     SINGLE = 0
     DUAL = 1
     QUAD = 2
     OCT = 3
-    FULL_PAGE = 7  # this is 256 words?
+    FULL_PAGE = 7 # this is 256 words?
 
 
 class _Command(enum.Enum):
-    """Command set for SDRAM"""
-
+    """ Command set for SDRAM """
     MRS_WRITE = 0
     ACTIVATE = 1
     PRECHARGE = 2
     WRITE = 3
     READ = 4
-    CBR = 5  # auto refresh
+    CBR = 5 # auto refresh
     SELF_REFRESH = 6
     BRST_STOP = 7
     NOP = 8
 
 
+
 class BankController(wiring.Component):
     """Manages a single Bank. Has a bank locking/state tracker,
     can issue commands"""

src/groovylight/tests/test_geom.py

@@ -2,12 +2,11 @@ from ..geom import Coord, BBox
 
 import pytest
 
-
 def test_coord_comparison():
-    c1 = Coord(0, 0)
-    c2 = Coord(0, 1)
-    c3 = Coord(1, 1)
-    c3_other = Coord(1, 1)
+    c1 = Coord(0,0)
+    c2 = Coord(0,1)
+    c3 = Coord(1,1)
+    c3_other = Coord(1,1)
 
     assert c1 < c3
     assert not c1 < c2, "both x,y must be greater/lt/eq"
@@ -16,24 +15,23 @@ def test_coord_comparison():
     assert c3 == c3_other, "Coords with same numbers should equal each other"
     assert c3 != c2
 
-
 def test_coord_construction():
     with pytest.raises(RuntimeError):
-        Coord(0, -1)
+        Coord(0,-1)
 
 
 def test_bbox():
-    b = BBox(Coord(1, 1), Coord(3, 2))
+    b = BBox(Coord(1,1), Coord(3,2))
 
     assert b.width == 2
     assert b.height == 1
 
-    assert b.contains(Coord(1, 2))
-    assert not b.contains(Coord(0, 0))
-
+    assert b.contains(Coord(1,2))
+    assert not b.contains(Coord(0,0))
+    
     # TODO: test .intersect(other)
 
     with pytest.raises(RuntimeError):
-        BBox(Coord(0, 0), Coord(1, 0))
+        BBox(Coord(0,0), Coord(1,0))
     with pytest.raises(RuntimeError):
-        BBox(Coord(1, 1), Coord(0, 0))
+        BBox(Coord(1,1), Coord(0,0))

src/groovylight/tests/test_hub75.py

@@ -5,7 +5,7 @@ from amaranth.lib.wiring import In, Out
 from amaranth.lib.memory import Memory, WritePort
 from amaranth.sim import Simulator
 
-from ..hub75 import Hub75Coordinator, Hub75StringDriver, Rgb666Layout
+from ..bitslicer import Hub75StringDriver, Rgb666Layout
 
 
 def test_stringdriver():
@@ -36,8 +36,3 @@ def test_stringdriver():
 
     with sim.write_vcd("output.vcd"):
         sim.run_until(1e-6 * 1000)
-
-
-def test_hub75():
-    m = Module()
-    m.submodules.dut = dut = Hub75Coordinator(1)

src/groovylight/tests/test_swapbuffer.py

@@ -1,6 +1,11 @@
+from amaranth import Array, Module, Cat, Signal, Assert, unsigned
+from amaranth.build import Platform
+from amaranth.lib import wiring, data
+from amaranth.lib.wiring import In, Out
+from amaranth.lib.memory import Memory, WritePort
 from amaranth.sim import Simulator
 
-from ..hub75 import Hub75StringDriver, Rgb666Layout, SwapBuffer
+from ..bitslicer import Hub75StringDriver, Rgb666Layout, SwapBuffer
 
 
 def test_swapbuffer():
@@ -20,11 +25,9 @@ def test_swapbuffer():
         assert ctx.get(dut.read_port.data) == init_color
         # swap buffer
         ctx.set(dut.selector, 1)
-        await ctx.tick().repeat(
-            2
-        )  # takes two clocks after switching selector to output data.
+        await ctx.tick().repeat(2) # takes two clocks after switching selector to output data.
         assert ctx.get(dut.read_port.data) == test_color
-
+    
     # TODO: add more assertions/verification
     sim.add_testbench(testbench)
     with sim.write_vcd("output.vcd"):

tests/test_platform.py

@@ -1,16 +1,8 @@
-import shutil
-import pytest
 from amaranth import Elaboratable, Module, Signal
 from amaranth.lib.io import Buffer
 from groovylight.platforms.colorlight_5a75b_v8_2 import Colorlight_5A75B_R82Platform
 
 
-def progs_exist(programs) -> bool:
-    for p in programs:
-        if shutil.which(p) is None:
-            return False
-    return True
-
 class Blinky(Elaboratable):
     def elaborate(self, platform):
         m = Module()
@@ -30,8 +22,5 @@ class Blinky(Elaboratable):
 
 
 def test_platform():
-    if not progs_exist(["yosys", "nextpnr-ecp5", "openFPGALoader"]):
-        pytest.skip("missing toolchain programs")
     plat = Colorlight_5A75B_R82Platform()
-
     plat.build(Blinky())