/*
Package xbee provides communication and configuration of Digi XBee products

(and other Digi products that are similar such as the XLR Pro). It provides
a net.Conn-like interface as well as AT commands for configuration. The most
common usage of the package is with a Session, which provides
*/
package xbee

import (
	"bufio"
	"encoding/binary"
	"errors"
	"fmt"
	"io"
	"net"
	"runtime"
	"strconv"
	"strings"
	"sync"
	"time"

	"go.bug.st/serial"
	"golang.org/x/exp/slog"
)

// TODO: implement net.Conn for Session/Conn. We are missing LocalAddr, RemoteAddr,
// and Deadline related methods.

// XBeeAddr is an XBee device address.
type XBeeAddr uint64

func (addr XBeeAddr) String() string {
	return fmt.Sprintf("%X", uint64(addr))
}

func (addr XBeeAddr) Network() string {
	return "xbee"
}

// Session represents a connection to a locally-attached XBee. The connection can be through
// serial/USB or TCP/IP depending on what is supported by the device.
// Session implements the net.Conn interface, so it can be used anywhere a net.Conn can be used.
// This also means that deadlines can be set.
type Session struct {
	ioDev io.ReadWriteCloser
	ct    connTrack
	log   slog.Logger
	// this buffer is used for storing data that must be read at some point.
	rxBuf *bufio.ReadWriter

	writeLock sync.Mutex // prevents multiple writers from accessing the port at once.

	// conns contain a map of addresses to connections. This means that there
	// can only be one direct connection to a device. This is pretty reasonable IMO.
	// but needs to be documented very clearly.
	conns map[uint64]*Conn
}

// NewSession takes an IO device and a logger and returns a new XBee session.
func NewSession(dev io.ReadWriteCloser, baseLog *slog.Logger) (*Session, error) {
	sess := &Session{
		ioDev: dev,
		log:   *baseLog,
		ct:    *NewConnTrack(),
	}

	// setup io readwriter with a pipe.
	rd, wr := io.Pipe()
	// this is for reading data *only* - writes are different! it's a
	// readWriter because the goroutine that runs scan continuously (and handles all other packets)
	// will write to the buffer when new Rx packets come in, and we can read out from application code.
	sess.rxBuf = bufio.NewReadWriter(bufio.NewReader(rd), bufio.NewWriter(wr))

	// start the rx handler in the background. we close it later by closing the serial port.

	go sess.rxHandler()

	return sess, nil
}

// before we can write `Read(p []byte)` we have to have a goroutine that takes the input from
// the serial port and parses it out - if it's data, we push the data to a buffer for
// the application to read the bytes on its own.
//
// if it's a different kind of packet, we do custom functionality (free the conntrack, update
// local status, etc)
func (sess *Session) rxHandler() {
	// we wrap the serial port read line in a bufio.scanner using our custom split function.
	scan := bufio.NewScanner(sess.ioDev)
	scan.Split(xbeeFrameSplit)

	// scan.Scan() will return false when there's EOF, i.e the io device is closed.
	// this is activated by sess.Close()
	for scan.Scan() {
		data, err := parseFrame(scan.Bytes())
		if err != nil {
			sess.log.Warn("error parsing frame", "error", err, "data", data)
			continue
		}

		switch XBeeCmd(data[0]) {
		case RxPktType:
			// we parse the data, and push it to the rx buffer.
			//TODO: if we have multiple remotes on the network, we need to track them here.
			frame, err := ParseRxFrame(data)
			if err != nil {
				sess.log.Warn("error parsing rx packet", "error", err, "data", data)
				break //continue?
			}
			// take the data and write it to our internal rx packet buffer.
			_, err = sess.rxBuf.Write(frame.Payload)
			if err != nil {
				sess.log.Warn("error writing data", "error", err, "payload", frame.Payload)
			}

		case TxStatusType, ATCmdResponseType, RemoteCmdRespType:
			// we hand the frame back via the channel. we directly find the ID since it's always
			// the second byte.
			idx := data[1]

			err := sess.ct.ClearMark(idx, data)
			if err != nil {
				// we got a rogue packet lol
				sess.log.Warn("rogue frame ID", "id", idx, "error", err)
			}

		default:
			// we don't know what to do with it.
			sess.log.Info("unhandled packet type", "type", data[0], "id", data[1])

		}

	}
	// if we get here, the serial port has closed. this is fine.
	sess.log.Debug("closing rx handler", "err", scan.Err())
}

// This implements io.Reader for the UART Session.
func (sess *Session) Read(p []byte) (int, error) {
	// Since we have an rx buffer, we just read from that and return the results.
	return sess.rxBuf.Read(p)
}

// Write sends a message to all XBees listening on the network. To send a message to a specific
// XBee, use Dial() to get a Conn
func (sess *Session) Write(p []byte) (int, error) {

	return sess.writeAddr(p, 0xFFFF)

}

// internal function used by Conn to write data to a specific address.
func (sess *Session) writeAddr(p []byte, dest uint64) (n int, err error) {

	idx, ch, err := sess.ct.GetMark()
	if err != nil {
		return
	}

	wf := &TxFrame{
		Id:          idx,
		Destination: dest,
		Payload:     p,
	}

	sess.writeLock.Lock()
	n, err = writeXBeeFrame(sess.ioDev, wf.Bytes())
	sess.writeLock.Unlock()
	if err != nil {
		return
	}
	n = n - 4

	// finally, wait for the channel we got to return. this means that
	// the matching response frame was received, so we can parse it.
	// TODO: add timeout.
	responseFrame := <-ch

	// this is a tx status frame bytes, so lets parse it out.
	status, err := ParseTxStatusFrame(responseFrame)
	if err != nil {
		return
	}

	if status.Status != 0 {
		err = fmt.Errorf("tx failed 0x%x", status.Status)
	}

	return
}

// sends a local AT command. If `queued` is true, the command is not immediately applied;
// instead, an AC command must be set to apply the queued changes. `queued` does not
// affect query-type commands, which always return right away.
// the AT command is an interface.
func (sess *Session) ATCommand(cmd [2]rune, data []byte, queued bool) ([]byte, error) {
	// we must encode the command, and then create the actual packet.
	// then we send the packet, and wait for the response
	// TODO: how to handle multiple-response-packet AT commands?
	// (mainly Node Discovery ND)

	// get a mark for the frame

	idx, ch, err := sess.ct.GetMark()
	if err != nil {
		return nil, err
	}
	rawData := encodeATCommand(cmd, data, idx, queued)

	sess.writeLock.Lock()
	_, err = writeXBeeFrame(sess.ioDev, rawData)
	sess.writeLock.Unlock()

	if err != nil {
		return nil, fmt.Errorf("error writing xbee frame: %w", err)
	}

	// TODO: add timeout.

	var respBytes []byte
	select {
	case respBytes = <-ch:
	case <-time.After(1 * time.Second):
		return nil, errors.New("timeout waiting for response frame")
	}
	resp, err := ParseATCmdResponse(respBytes)
	if err != nil {
		return nil, err
	}

	if resp.Status != 0 {
		// sinec ATCmdStatus is a stringer thanks to the generator
		return resp.Data, fmt.Errorf("AT command failed: %v", resp.Status)
	}

	return resp.Data, nil

}

// Does this need to exist?
func (sess *Session) GetStatus() {
	panic("TODO: implement")
}

// Implement the io.Closer.
func (sess *Session) Close() error {
	return sess.ioDev.Close()
}

func (sess *Session) LocalAddr() XBeeAddr {
	// TODO: should we get this once at the start? and then just store it?
	sh, _ := sess.ATCommand([2]rune{'S', 'H'}, nil, false)
	sl, _ := sess.ATCommand([2]rune{'S', 'L'}, nil, false)

	addr := uint64(binary.BigEndian.Uint32(sh)) << 32 & uint64(binary.BigEndian.Uint32(sl))
	return XBeeAddr(addr)
}

func (sess *Session) RemoteAddr() XBeeAddr {
	return 0xFFFF
}

/*
The session implements a io.Writer and io.Reader, but does not
have a way of connecting to a specific XBee by default. To do this, we would
need to either pass an address to the write and read methods (breaking io.ReadWriter),
or add another command. Rather than do that, we can make a "Conn" class, which represents
a single connection to a device on the network.

*/

// Conn is a connection to a specific remote XBee. Conn allows for the user to
// contact one Xbee for point-to-point communications. This enables ACK packets
// for reliable transmission.
type Conn struct {
	parent *Session
	addr   XBeeAddr
}

func (c *Conn) Write(p []byte) (int, error) {
	return c.parent.writeAddr(p, uint64(c.addr))
}

func (c *Conn) Close() error {

	return nil
}

func (c *Conn) GetRSSI() int {
	return 0
}

/*
	 Transport represents a connection that an XBee can use.
	  it's mostly a helper struct to parse URIs. It can parse the following formats:

	  	tcp://192.168.4.5:8340
		COM1
		/dev/ttyUSB0:115200

for network devices, a port is optional. If it is not specified it will
default to 2616. The colon after a serial port sets the baud rate.
It will default to 9600 if not specified.
*/
type Transport struct {
	io.ReadWriteCloser
	devType string
}

func (xbt *Transport) Type() string {
	return xbt.devType
}

// parseDeviceString parses the device parameter and sets up the associated
// device. The device is returned in an xbeeTransport which also stores
// the underlying type of the device with Type() string
func ParseDeviceString(dev string) (*Transport, error) {
	xbt := &Transport{}

	parseSerial := func(s string) (serial.Port, error) {

		path, bRate, found := strings.Cut(dev, ":")

		mode := &serial.Mode{
			BaudRate: 9600,
		}
		if found {
			b, err := strconv.Atoi(bRate)
			if err != nil {
				return nil, err
			}
			mode.BaudRate = b
		}
		return serial.Open(path, mode)
	}

	// actually parse the path
	if strings.HasPrefix(dev, "tcp://") {

		addr, _ := strings.CutPrefix(dev, "tcp://")

		conn, err := net.Dial("tcp", addr)
		if err != nil {
			return nil, err
		}
		xbt.ReadWriteCloser = conn

		xbt.devType = "tcp"

	} else if strings.HasPrefix(dev, "COM") && runtime.GOOS == "windows" {

		sDev, err := parseSerial(dev)
		if err != nil {
			return nil, err
		}
		xbt.ReadWriteCloser = sDev
		xbt.devType = "serialWin"

	} else if strings.HasPrefix(dev, "/") && runtime.GOOS != "windows" {
		sDev, err := parseSerial(dev)
		if err != nil {
			return nil, err
		}
		xbt.ReadWriteCloser = sDev
		xbt.devType = "serial"
	} else {
		return nil, errors.New("could not parse device path")
	}
	return xbt, nil
}