# OmniLink Bridge Provides MQTT bridge, web service API, time sync, and logging for [HAI/Leviton OmniPro II controllers](https://www.leviton.com/en/products/brands/omni-security-automation). Provides integration with [Samsung SmarthThings via web service API](https://github.com/excaliburpartners/SmartThings-OmniPro) and [Home Assistant via MQTT](https://www.home-assistant.io/components/mqtt/). ## Download You can use docker to build an image from git or download the [binary here](http://www.excalibur-partners.com/downloads/OmniLinkBridge_1_1_3.zip). ## Requirements - [Docker](https://www.docker.com/) - .NET Framework 4.5.2 (or Mono equivalent) ## Operation - Area, Messages, Units, and Zones are logged to mySQL when status changes - Thermostats are logged to mySQL once per minute - If no notifications are received within 4 minutes a request is issued - After 5 minutes of no updates a warning will be logged and mySQL will not be updated - If the temp is 0 a warning will be logged and mySQL will not be updated - Controller time is checked and compared to the local computer time disregarding time zones ## Notifications - Supports email, prowl, and pushover - Always sent for area alarms and critical system events - Optionally enable for area status changes and console messages ## Docker (preferred) 1. Clone git repo and build docker image - git clone https://github.com/excaliburpartners/OmniLinkBridge.git - cd OmniLinkBridge - docker build --tag="omnilink-bridge" . 2. Configure at a minimum the controller IP and encryptions keys. The web service port must be 8000 unless the Dockerfile is changed. - mkdir /opt/omnilink-bridge - cp OmniLinkBridge/OmniLinkBridge.ini /opt/omnilink-bridge - vim /opt/omnilink-bridge/OmniLinkBridge.ini 3. Start docker container - docker run -d --name="omnilink-bridge" -v /opt/omnilink-bridge:/config -v /etc/localtime:/etc/localtime:ro --net=host --restart always omnilink-bridge 4. Verify connectivity by looking at logs - docker container logs omnilink-bridge ## Installation Windows 1. Copy files to your desired location like C:\OmniLinkBridge 2. Edit OmniLinkBridge.ini and define at a minimum the controller IP and encryptions keys 3. Run OmniLinkBridge.exe to verify connectivity 4. Add Windows service - sc create OmniLinkBridge binpath=C:\OmniLinkBridge\OmniLinkBridge.exe 5. Start service - net start OmniLinkBridge ## Installation Linux 1. Copy files to your desired location like /opt/OmniLinkBridge 2. Configure at a minimum the controller IP and encryptions keys - vim OmniLinkBridge.ini 3. Run as interactive to verify connectivity - mono OmniLinkBridge.exe -i 4. Add systemd file and configure paths - cp omnilinkbridge.service /etc/systemd/system/ - vim /etc/systemd/system/omnilinkbridge.service - systemctl daemon-reload 5. Enable at boot and start service - systemctl enable omnilinkbridge.service - systemctl start omnilinkbridge.service ## MySQL Setup You will want to install the MySQL Community Server, Workbench, and ODBC Connector. The Workbench software provides a graphical interface to administer the MySQL server. The OmniLink Bridge uses ODBC to communicate with the database. The MySQL ODBC Connector library is needed for Windows ODBC to communicate with MySQL. http://dev.mysql.com/downloads/mysql/ http://dev.mysql.com/downloads/tools/workbench/ http://dev.mysql.com/downloads/connector/odbc/ At this point we need to open MySQL Workbench to create the database (called a schema in the Workbench GUI) for OmniLinkBridge to use. 1. After opening the program double-click on "Local instance MySQL" and enter the password you set in the wizard. 2. On the toolbar click the "Create a new schema" button, provide a name, and click apply. 3. On the left side right-click on the schema you created and click "Set as default schema". 4. In the middle section under Query1 click the open file icon and select the OmniLinkBridge.sql file. 5. Click the Execute lighting bolt to run the query, which will create the tables. Lastly in OmniLinkBridge.ini set mysql_connection. This should get you up and running. The MySQL Workbench can also be used to view the data that OmniLink Bridge inserts into the tables. mysql_connection = DRIVER={MySQL ODBC 8.0 Driver};SERVER=localhost;DATABASE=OmniLinkBridge;USER=root;PASSWORD=myPassword;OPTION=3; ## Web Service API To test the API you can use your browser to view a page or PowerShell (see below) to change a value. - http://localhost:8000/ListUnits - http://localhost:8000/GetUnit?id=1 - Invoke-WebRequest -Uri "http://localhost:8000/SetUnit" -Method POST -ContentType "application/json" -Body (convertto-json -InputObject @{"id"=1;"value"=100}) -UseBasicParsing ## MQTT This module will also publish discovery topics for Home Assistant to auto configure devices. As of writing you will need to add a custom_component override in your Home Assistant config directory for the following pull requests. - [Add target temperature low high to MQTT climate](https://github.com/home-assistant/home-assistant/pull/17391/) - [Add night arm mode to MQTT alarm control panel](https://github.com/home-assistant/home-assistant/pull/17390/) ``` mkdir -p custom_components/mqtt wget https://raw.githubusercontent.com/home-assistant/home-assistant/dcfcca77d72b0c35cda9950a69f621b4e8cff81b/homeassistant/components/climate/mqtt.py -O custom_components/mqtt/climate.py wget https://raw.githubusercontent.com/home-assistant/home-assistant/fa2510f58b40cfea2974530658ee011d984db6c7/homeassistant/components/alarm_control_panel/mqtt.py -O custom_components/mqtt/alarm_control_panel.py ``` ### Areas ``` SUB omnilink/areaX/state string triggered, pending, armed_night, armed_night_delay, armed_home, armed_home_instant, armed_away, armed_vacation, disarmed SUB omnilink/areaX/basic_state string triggered, pending, armed_night, armed_home, armed_away, disarmed PUB omnilink/areaX/command string(insensitive) arm_home, arm_away, arm_night, disarm, arm_home_instant, arm_night_delay, arm_vacation ``` ### Zones ``` SUB omnilink/zoneX/state string secure, not_ready, trouble, armed, tripped, bypassed SUB omnilink/zoneX/basic_state string OFF, ON SUB omnilink/zoneX/current_temperature (optional) int Current temperature in degrees fahrenheit SUB omnilink/zoneX/current_humidity (optional) int Current relative humidity PUB omnilink/zoneX/command string(insensitive) bypass, restore ``` ### Units ``` SUB omnilink/unitX/state PUB omnilink/unitX/command string OFF, ON SUB omnilink/unitX/brightness_state PUB omnilink/unitX/brightness_command int Level from 0 to 100 percent ``` ### Thermostats ``` SUB omnilink/thermostatX/current_operation string idle, cool, heat SUB omnilink/thermostatX/current_temperature int Current temperature in degrees fahrenheit SUB omnilink/thermostatX/current_humidity int Current relative humidity SUB omnilink/thermostatX/temperature_heat_state SUB omnilink/thermostatX/temperature_cool_state PUB omnilink/thermostatX/temperature_heat_command PUB omnilink/thermostatX/temperature_cool_command int Setpoint in degrees fahrenheit SUB omnilink/thermostatX/humidify_state SUB omnilink/thermostatX/dehumidify_state PUB omnilink/thermostatX/humidify_command PUB omnilink/thermostatX/dehumidify_command int Setpoint in relative humidity SUB omnilink/thermostatX/mode_state PUB omnilink/thermostatX/mode_command string auto, off, cool, heat SUB omnilink/thermostatX/fan_mode_state PUB omnilink/thermostatX/fan_mode_command string auto, on, cycle SUB omnilink/thermostatX/hold_state PUB omnilink/thermostatX/hold_command string off, hold ``` ### Buttons ``` SUB omnilink/buttonX/state string OFF PUB omnilink/buttonX/command string ON ``` ## Change Log Version 1.1.3 - 2019-02-10 - Publish config when reconnecting to MQTT - Update readme documentation - Add override zone type for web service - Add area json status and climate temp sensor - Fix compatibility with Home Assistant 0.87 MQTT strict config Version 1.1.2 - 2018-10-23 - Add min and max climate temperatures - Update docker run command to use local time zone - Improve area and zone MQTT support - Add option to change MQTT prefix to support multiple instances - Add detailed zone sensor and thermostat humidity sensor - Add prefix for MQTT discovery entity name - Request zone status update on area status change Version 1.1.1 - 2018-10-18 - Added docker support - Save subscriptions on change Version 1.1.0 - 2018-10-13 - Renamed to OmniLinkBridge - Restructured code to be event based with modules - Added MQTT module for Home Assistant - Added pushover notifications - Added web service API subscriptions file to persist subscriptions Version 1.0.8 - 2016-11-28 - Fixed web service threading when multiple subscriptions exist - Added additional zone types to contact and motion web service API - Split command line options for config and log files Version 1.0.7 - 2016-11-25 - Use previous area state when area is arming for web service API - Add interactive command line option and use path separator for Mono compatibility Version 1.0.6 - 2016-11-20 - Added thermostat status and auxiliary temp to web service API Version 1.0.5 - 2016-11-15 - Added web service API for Samsung SmartThings integration Version 1.0.4 - 2014-05-08 - Merged HAILogger.exe and HAILoggerService.exe - Added immediate time sync after controller reconnect Version 1.0.3 - 2013-01-06 - Added setting for prowl console message notification - Added settings for verbose output control - Added setting to enable mySQL logging - Added queue to mySQL logging - Changed mySQL log time from mySQL NOW() to computer time - Changed prowl notifications to be asynchronous - Fixed crash when prowl api down - Fixed setting yes/no parsing so no setting works - Fixed incorrect thermostat out of date status warning Version 1.0.2 - 2012-12-30 - Fixed thermostat invalid mySQL logging error Version 1.0.1 - 2012-12-30 - Added setting to adjust time sync interval - Fixed crash when controller time not initially set Version 1.0.0 - 2012-12-29 - Initial release